| Available Standards And Grades | |||||
| GB/T5213-2008 | din1623 | EN 10130-2006 | JIS G3141-2005 | ISO 3574-1999 | ASTM A1008M-07 |
| DC01 | ST12 | DC01 | SPCC | CR1 | CS Type C |
| DC03 | ST13 | DC03 | SPCD | CR2 | CS Type A，B |
| DC04 | ST14,ST15 | DC04 | SPCE | CR3 | DS Type A，B |
| DC05 | DC05 | SPCF | CR4 | DDS | |
| DC06 | ST16 | DC06 | SPCG | CR5 | EDDS |
| DC07 | DC07 | — | — | — | |
| Available Sizes | |||||
| Thickness | 0.11mm-3.0mm | Width | 800mm-2000mm | ||
| Delivery Form | |||||
| Coil (steel coil inner diameter is generally 508mm and 600mm), plate, steel strip | |||||
| Delivery Status | |||||
| Rolling hardening: Cold rolling is completed without annealing. | |||||
| Normal: Annealed after cold rolling. | |||||
| Delivery Date | |||||
| Regular size products can be delivered to the port or designated location within 3 working days after arrival. | |||||
| Annual Output | |||||
| 1 million tons | |||||
| Surface Quality | |||||
| Level | Code | Characteristic | |||
| General surface | FB | The surface is allowed to have a small amount of defects that do not affect the formability and coating and plating adhesion, such as slight scratches, indentations, pitting, roll marks, and oxidized colors. | |||
| Advanced surface | FC | The better side of the two sides of the product has no visible defects visible to the naked eye, and the other side should at least meet the requirements of FB. | |||
| Super advanced surface | FD | The better side of the two sides of the product should not have defects affecting the appearance quality after painting or the appearance quality after plating, and the other side should at least meet the requirements of FB. | |||
| Chemical Composition | ||||||
| Name | Chemical Composition | |||||
| C max | Mn max | P max | S max | Alts min | Ti max | |
| DC01 | 0.1 | 0.5 | 0.035 | 0.025 | 0.020 | |
| DC03 | 0.08 | 0.45 | 0.030 | 0.025 | 0.020 | |
| DC04 | 0.08 | 0.40 | 0.025 | 0.020 | 0.020 | |
| DC05 | 0.008 | 0.30 | 0.020 | 0.020 | 0.015 | 0.2 |
| DC06 | 0.008 | 0.30 | 0.020 | 0.020 | 0.015 | 0.2 |
| Mechanical | ||||||
| Name | Yield Strength | Tensile Strength | Elongation After Fracture | |||
| Nominal Thickness | ||||||
| 0.7 | 0.7-1.0 | 1.0-1.6 | 1.6 | |||
| DC01 | 130-260 | 270 | 28 | 30 | 32 | 34 |
| DC03 | 120-240 | 270 | 32 | 34 | 35 | 36 |
| DC04 | 120-210 | 270 | 36 | 38 | 39 | 40 |
| DC05 | 110-190 | 260 | 36 | 38 | 39 | 40 |
| DC06 | 100-180 | 250 | 39 | 40 | 41 | 42 |
| Product Stamping Grade | |
| DC01 | General Use |
| DC03 | Drawing |
| DC04 | deep drawing quality |
| DC05 | extra-deep drawing quality |
| DC06 | super extra-deep drawing quality |
Application Area
| Available Standards And Grades | |||||
| GB/T5213-2008 | din1623 | EN 10130-2006 | JIS G3141-2005 | ISO 3574-1999 | ASTM A1008M-07 |
| DC01 | ST12 | DC01 | SPCC | CR1 | CS Type C |
| DC03 | ST13 | DC03 | SPCD | CR2 | CS Type A，B |
| DC04 | ST14,ST15 | DC04 | SPCE | CR3 | DS Type A，B |
| DC05 | DC05 | SPCF | CR4 | DDS | |
| DC06 | ST16 | DC06 | SPCG | CR5 | EDDS |
| DC07 | DC07 | — | — | — | |
| Available Sizes | |||||
| Thickness | 0.11mm-3.0mm | Width | 800mm-2000mm | ||
| Delivery Form | |||||
| Coil (steel coil inner diameter is generally 508mm and 600mm), plate, steel strip | |||||
| Delivery Status | |||||
| Rolling hardening: Cold rolling is completed without annealing. | |||||
| Normal: Annealed after cold rolling. | |||||
| Delivery Date | |||||
| Regular size products can be delivered to the port or designated location within 3 working days after arrival. | |||||
| Annual Output | |||||
| 1 million tons | |||||
| Surface Quality | |||||
| Level | Code | Characteristic | |||
| General surface | FB | The surface is allowed to have a small amount of defects that do not affect the formability and coating and plating adhesion, such as slight scratches, indentations, pitting, roll marks, and oxidized colors. | |||
| Advanced surface | FC | The better side of the two sides of the product has no visible defects visible to the naked eye, and the other side should at least meet the requirements of FB. | |||
| Super advanced surface | FD | The better side of the two sides of the product should not have defects affecting the appearance quality after painting or the appearance quality after plating, and the other side should at least meet the requirements of FB. | |||
| Chemical Composition | ||||||
| Name | Chemical Composition | |||||
| C max | Mn max | P max | S max | Alts min | Ti max | |
| DC01 | 0.1 | 0.5 | 0.035 | 0.025 | 0.020 | |
| DC03 | 0.08 | 0.45 | 0.030 | 0.025 | 0.020 | |
| DC04 | 0.08 | 0.40 | 0.025 | 0.020 | 0.020 | |
| DC05 | 0.008 | 0.30 | 0.020 | 0.020 | 0.015 | 0.2 |
| DC06 | 0.008 | 0.30 | 0.020 | 0.020 | 0.015 | 0.2 |
| Mechanical | ||||||
| Name | Yield Strength | Tensile Strength | Elongation After Fracture | |||
| Nominal Thickness | ||||||
| 0.7 | 0.7-1.0 | 1.0-1.6 | 1.6 | |||
| DC01 | 130-260 | 270 | 28 | 30 | 32 | 34 |
| DC03 | 120-240 | 270 | 32 | 34 | 35 | 36 |
| DC04 | 120-210 | 270 | 36 | 38 | 39 | 40 |
| DC05 | 110-190 | 260 | 36 | 38 | 39 | 40 |
| DC06 | 100-180 | 250 | 39 | 40 | 41 | 42 |
| Product Stamping Grade | |
| DC01 | General Use |
| DC03 | Drawing |
| DC04 | deep drawing quality |
| DC05 | extra-deep drawing quality |
| DC06 | super extra-deep drawing quality |
Application Area
