| Quantity: | |
|---|---|
2A12
| Alloy Grade | 2A12 Aluminium Plate-Military Duraluminium |
| Material State | O, T3， T4, T351, H112 |
| Thickness（mm） | 0.3-300 |
| Width（mm） | 500-2600 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, Precision parts, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 2A12-T4 | 425 | 275 | 12 | 120 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 2A12 | 0.50 | 0.50 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | / | 0.30 | 0.15 | / | each | total | |||||||||||
| 0.05 | 0.15 | ARE | ||||||||||||||||||||
| Alloy Grade | 2A12 Aluminium Plate-Military Duraluminium |
| Material State | O, T3， T4, T351, H112 |
| Thickness（mm） | 0.3-300 |
| Width（mm） | 500-2600 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, Precision parts, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 2A12-T4 | 425 | 275 | 12 | 120 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 2A12 | 0.50 | 0.50 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | / | 0.30 | 0.15 | / | each | total | |||||||||||
| 0.05 | 0.15 | ARE | ||||||||||||||||||||
