| Quantity: | |
|---|---|
2A14
| Alloy Grade | 2A14 Aluminium Plate-Military Duraluminium |
| Material State | O, T4, T351, H112 |
| Thickness（mm） | 1.0-300 |
| Width（mm） | 500-2600 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, precision parts, large frames, bridges, large shells, truck components, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 2A14-T4 | 440 | 280 | 10 | 120 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 2A14 | min0.6 | 0.70 | min3.9 | min0.4 | min1.2 | / | 0.30 | 0.15 | / | each | total | |||||||||||
| max1.2 | max4.8 | max1.0 | max1.8 | 0.05 | 0.15 | ARE | ||||||||||||||||
| Alloy Grade | 2A14 Aluminium Plate-Military Duraluminium |
| Material State | O, T4, T351, H112 |
| Thickness（mm） | 1.0-300 |
| Width（mm） | 500-2600 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, precision parts, large frames, bridges, large shells, truck components, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 2A14-T4 | 440 | 280 | 10 | 120 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 2A14 | min0.6 | 0.70 | min3.9 | min0.4 | min1.2 | / | 0.30 | 0.15 | / | each | total | |||||||||||
| max1.2 | max4.8 | max1.0 | max1.8 | 0.05 | 0.15 | ARE | ||||||||||||||||
