| Quantity: | |
|---|---|
LY12
| Alloy Grade | LY12 Aluminium Plate-Military Duraluminium |
| Material State | O,T3,T4, T351, H112 |
| Thickness（mm） | 0.3-300 |
| Width（mm） | 500-2600 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, precision parts etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| LY12-T4 | 425 | 275 | 12 | 120 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| LY12 | 0.50 | 0.50 | min3.8 | min0.3 | min1.2 | 0.10 | 0.30 | 0.15 | / | each | total | |||||||||||
| max4.9 | max0.9 | max1.8 | 0.05 | 0.15 | ARE | |||||||||||||||||
| Alloy Grade | LY12 Aluminium Plate-Military Duraluminium |
| Material State | O,T3,T4, T351, H112 |
| Thickness（mm） | 0.3-300 |
| Width（mm） | 500-2600 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, precision parts etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| LY12-T4 | 425 | 275 | 12 | 120 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| LY12 | 0.50 | 0.50 | min3.8 | min0.3 | min1.2 | 0.10 | 0.30 | 0.15 | / | each | total | |||||||||||
| max4.9 | max0.9 | max1.8 | 0.05 | 0.15 | ARE | |||||||||||||||||
