| Quantity: | |
|---|---|
3A21
| Alloy Grade | 3A21 Aluminium Plate-Rustproof Aluminium |
| Material State | O,H12,H14,H16,H18,H22,H24,H26,H32 |
| Thickness（mm） | 1.0-100 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Body skins, roof panels, floors, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 3A21(H112) | 120 | / | 16 | / |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 3A21 | 60.00 | 0.70 | 0.2 | min1.0 | 0.05 | / | 0.10 | 0.10 | 0.15 | each | total | |||||||||||
| max1.6 | 0.05 | 0.15 | ARE | |||||||||||||||||||
| Alloy Grade | 3A21 Aluminium Plate-Rustproof Aluminium |
| Material State | O,H12,H14,H16,H18,H22,H24,H26,H32 |
| Thickness（mm） | 1.0-100 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Body skins, roof panels, floors, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 3A21(H112) | 120 | / | 16 | / |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 3A21 | 60.00 | 0.70 | 0.2 | min1.0 | 0.05 | / | 0.10 | 0.10 | 0.15 | each | total | |||||||||||
| max1.6 | 0.05 | 0.15 | ARE | |||||||||||||||||||
