| Quantity: | |
|---|---|
5182
| Alloy Grade | 5182 Aluminium Plate-Rustproof Aluminium |
| Material State | O,H12,H14,H16,H22,H24,H112,H116,H321 |
| Thickness（mm） | 0.5-10 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Fuel tanks, petrol or lubricating oil conduits, containers for all kinds of liquids, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 5182(O) | 175 | 80 | 15 | 70 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 5182 | 0.20 | 0.35 | 0.15 | min0.20 | min4.0 | 0.10 | 0.25 | 0.10 | / | each | total | |||||||||||
| max0.50 | max5.0 | 0.05 | 0.15 | ARE | ||||||||||||||||||
| Alloy Grade | 5182 Aluminium Plate-Rustproof Aluminium |
| Material State | O,H12,H14,H16,H22,H24,H112,H116,H321 |
| Thickness（mm） | 0.5-10 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Fuel tanks, petrol or lubricating oil conduits, containers for all kinds of liquids, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 5182(O) | 175 | 80 | 15 | 70 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 5182 | 0.20 | 0.35 | 0.15 | min0.20 | min4.0 | 0.10 | 0.25 | 0.10 | / | each | total | |||||||||||
| max0.50 | max5.0 | 0.05 | 0.15 | ARE | ||||||||||||||||||
