| Quantity: | |
|---|---|
5A05
Lightweight Corrosion-resistant Durable Sheet for Architectural Aluminium Sheet
| Alloy Grade | 5A06 Aluminium Plate-Rustproof Aluminium |
| Material State | O,H112 |
| Thickness（mm） | 1.0-150 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Sheet metal parts, fuel tanks, flanges, etc. for marine traffic vehicles. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 5A05(H112) | 265 | 115 | 14 | / |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 5A05 | 0.50 | 0.50 | 0.10 | min0.3 | min4.8 | / | 0.20 | / | / | each | total | |||||||||||
| max0.6 | max5.5 | 0.05 | 0.15 | ARE | ||||||||||||||||||
Lightweight Corrosion-resistant Durable Sheet for Architectural Aluminium Sheet
| Alloy Grade | 5A06 Aluminium Plate-Rustproof Aluminium |
| Material State | O,H112 |
| Thickness（mm） | 1.0-150 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Sheet metal parts, fuel tanks, flanges, etc. for marine traffic vehicles. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 5A05(H112) | 265 | 115 | 14 | / |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 5A05 | 0.50 | 0.50 | 0.10 | min0.3 | min4.8 | / | 0.20 | / | / | each | total | |||||||||||
| max0.6 | max5.5 | 0.05 | 0.15 | ARE | ||||||||||||||||||
