| Quantity: | |
|---|---|
6061
| Alloy Grade | 6061 Aluminium Plate-General Duralumin |
| Material State | O,T6,T5,T651,H112 |
| Thickness（mm） | 0.8-500 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Mobile phone card slots, mobile phone cases, moulds, car bodies, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 6061(T6) | 290 | 240 | 10 | 95 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 6061 | min0.40 | 0.70 | min0.15 | 0.15 | min0.8 | min0.04 | 0.25 | 0.15 | / | each | total | |||||||||||
| max0.80 | max0.40 | max1.2 | max0.35 | 0.05 | 0.15 | ARE | ||||||||||||||||
| Alloy Grade | 6061 Aluminium Plate-General Duralumin |
| Material State | O,T6,T5,T651,H112 |
| Thickness（mm） | 0.8-500 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Mobile phone card slots, mobile phone cases, moulds, car bodies, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 6061(T6) | 290 | 240 | 10 | 95 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 6061 | min0.40 | 0.70 | min0.15 | 0.15 | min0.8 | min0.04 | 0.25 | 0.15 | / | each | total | |||||||||||
| max0.80 | max0.40 | max1.2 | max0.35 | 0.05 | 0.15 | ARE | ||||||||||||||||
