| Quantity: | |
|---|---|
6063
| Alloy Grade | 6063 Aluminium Plate-General Duralumin |
| Material State | O,T6,T5,T651,H112 |
| Thickness（mm） | 0.8-500 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Passenger car body structure parts, automobile engine parts, automobile wheel hubs, mobile phone shells, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 6063(T6) | 240 | 190 | 8 | 80 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 6063 | min0.20 | 0.35 | 0.10 | 0.15 | min0.6 | 0.05 | 0.15 | 0.10 | / | each | total | |||||||||||
| max0.60 | max0.9 | 0.05 | 0.15 | ARE | ||||||||||||||||||
| Alloy Grade | 6063 Aluminium Plate-General Duralumin |
| Material State | O,T6,T5,T651,H112 |
| Thickness（mm） | 0.8-500 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Passenger car body structure parts, automobile engine parts, automobile wheel hubs, mobile phone shells, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 6063(T6) | 240 | 190 | 8 | 80 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 6063 | min0.20 | 0.35 | 0.10 | 0.15 | min0.6 | 0.05 | 0.15 | 0.10 | / | each | total | |||||||||||
| max0.60 | max0.9 | 0.05 | 0.15 | ARE | ||||||||||||||||||
