| Quantity: | |
|---|---|
6082
| Alloy Grade | 6082 Aluminium Plate-General Duralumin |
| Material State | O,T6,T5,T651,H112 |
| Thickness（mm） | 0.8-500 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Camera lenses, couplers, marine fittings and hardware, electronic parts, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 6082(T6) | 310 | 260 | 6 | 90 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 6082 | min0.70 | 0.50 | 0.10 | min0.40 | min0.6 | 0.25 | 0.20 | 0.10 | / | each | total | |||||||||||
| max1.30 | max1.0 | max1.2 | 0.05 | 0.15 | ARE | |||||||||||||||||
| Alloy Grade | 6082 Aluminium Plate-General Duralumin |
| Material State | O,T6,T5,T651,H112 |
| Thickness（mm） | 0.8-500 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Camera lenses, couplers, marine fittings and hardware, electronic parts, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 6082(T6) | 310 | 260 | 6 | 90 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 6082 | min0.70 | 0.50 | 0.10 | min0.40 | min0.6 | 0.25 | 0.20 | 0.10 | / | each | total | |||||||||||
| max1.30 | max1.0 | max1.2 | 0.05 | 0.15 | ARE | |||||||||||||||||
