| Quantity: | |
|---|---|
7A04
| Alloy Grade | 7A04 Aluminium Plate-Aerospace super-hard aluminium |
| Material State | T6,T651 |
| Thickness（mm） | 3-400 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, high-strength parts, chemicals, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 7A04(T6) | 572 | 503 | 11 | 150 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 7A04 | 0.40 | 0.50 | min1.2 | 0.30 | min2.1 | min0.18 | min5.1 | 0.20 | / | each | total | |||||||||||
| max2.0 | max2.9 | max0.28 | max6.1 | 0.05 | 0.15 | ARE | ||||||||||||||||
| Alloy Grade | 7A04 Aluminium Plate-Aerospace super-hard aluminium |
| Material State | T6,T651 |
| Thickness（mm） | 3-400 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Moulds, high-strength parts, chemicals, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 7A04(T6) | 572 | 503 | 11 | 150 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 7A04 | 0.40 | 0.50 | min1.2 | 0.30 | min2.1 | min0.18 | min5.1 | 0.20 | / | each | total | |||||||||||
| max2.0 | max2.9 | max0.28 | max6.1 | 0.05 | 0.15 | ARE | ||||||||||||||||
