| Quantity: | |
|---|---|
7050
| Alloy Grade | 7050 Aluminium Plate-Aerospace super-hard aluminium |
| Material State | T6,T651,T7451 |
| Thickness（mm） | 3-400 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Tooling fixtures, golf balls, moulds, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 7050(T7451) | 470 | 390 | 6 | 150 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 7050 | 0.12 | 0.15 | min2.0 | 0.10 | min1.9 | 0.04 | min5.7 | 0.06 | / | each | total | |||||||||||
| max2.6 | max2.6 | max6.7 | 0.05 | 0.15 | ARE | |||||||||||||||||
| Alloy Grade | 7050 Aluminium Plate-Aerospace super-hard aluminium |
| Material State | T6,T651,T7451 |
| Thickness（mm） | 3-400 |
| Width（mm） | 100-2200 |
| Length（mm） | 500-10000 |
| Typical Application | Tooling fixtures, golf balls, moulds, etc. |
| Aluminium Alloy Grades(State) | Tensile Strength σb (MPa) | Yield Strength σ0.2 (MPa) | Elongation δ5 (%) | Hardness （HB) | ||||||||||
| 7050(T7451) | 470 | 390 | 6 | 150 |
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Ni | Alt | AL | |||||||||||
| 7050 | 0.12 | 0.15 | min2.0 | 0.10 | min1.9 | 0.04 | min5.7 | 0.06 | / | each | total | |||||||||||
| max2.6 | max2.6 | max6.7 | 0.05 | 0.15 | ARE | |||||||||||||||||
